InvestorsObserver
×
News Home

Sony Semiconductor Solutions to Release SWIR Image Sensor for Industrial Applications with Industry-Leading 5.32 Effective Megapixels

Tuesday, November 28, 2023 09:00 PM | PR Newswire via QuoteMedia

Sony Semiconductor Solutions to Release SWIR Image Sensor for Industrial Applications with Industry-Leading 5.32 Effective Megapixels
Sony Semiconductor Solutions to Release SWIR Image Sensor for Industrial Applications with Industry-Leading 5.32 Effective Megapixels

PR Newswire

Contributing to the evolution of various industrial equipment with an expanded lineup delivering high-resolution and low-light performance

ATSUGI, Japan , Nov. 28, 2023 /PRNewswire/ -- Sony Semiconductor Solutions Corporation (SSS) today announced the upcoming release of the IMX992 short-wavelength infrared (SWIR) image sensor for industrial equipment, with the industry's highest *1 pixel count, at 5.32 effective megapixels.

The new sensor uses SSS's proprietary Cu-Cu connection to achieve the industry's smallest *1 pixel size of 3.45 μm among SWIR image sensors. It also features an optimized pixel structure for efficiently capturing light, enabling high-definition imaging across a broad spectrum ranging from the visible to invisible short-wavelength infrared regions (wavelength: 0.4 to 1.7 μm). Furthermore, new shooting modes deliver high-quality images with significantly reduced noise in dark environments compared to conventional products.

In addition to this product, SSS will also release the IMX993 with a pixel size of 3.45 μm and an effective pixel count of 3.21 megapixels to further expand its SWIR image sensor lineup. These new SWIR image sensors with high pixel counts and high sensitivity will help contribute to the evolution of various industrial equipment.

*1

Among SWIR image sensors using indium-gallium arsenide (InGaAs). According to SSS research. (As of announcement on November 29, 2023.)

Model name

Sample shipment
date (planned)

IMX992 1/1.4-type (11.4 mm diagonal)
5.32-effective-megapixel SWIR image
sensor

Ceramic PGA package with
built-in thermoelectric
cooling device

February 2024

Ceramic LGA package

February 2024

IMX993 1/1.8-type (8.9 mm diagonal)
3.21-effective-megapixel SWIR image
sensor

Ceramic PGA package with
built-in thermoelectric
cooling device

February 2024

Ceramic LGA package

February 2024

In the industrial equipment domain in recent years, there has been increasing demand for improving productivity and preventing defective products from leaving the plant. In this context, the capacity to sense not only visible light but also light in the invisible band is in demand. SSS's SWIR image sensors, which are capable of seamless wide spectrum imaging in the visible to invisible short-wavelength infrared range using a single camera, are already being used in various processes such as semiconductor wafer bonding and defect inspection, as well as ingredient and contaminant inspections in food production.

The new sensors enable imaging with higher resolution using pixel miniaturization, while enhancing imaging performance in low-light environments to provide higher quality imaging in inspection and monitoring applications conducted in darker conditions. By making the most of the characteristics of short-wavelength infrared light, whose light reflection and absorption properties are different from those of visible light, these products help to further expand applications in such areas as inspection, recognition and measurement, thereby contributing to improved industrial productivity.

Main Features

  • High pixel count made possible by the industry's smallest * 1 pixels at 3.45 μm, delivering high-resolution imaging
    A Cu-Cu connection is used between the indium-gallium arsenide (InGaAs) layer that forms the photodiode of the light receiving unit and the silicon (Si) layer that forms the readout circuit. This design allows for a smaller pixel pitch, resulting in the industry's smallest *1 pixel size of 3.45 μm. This, in turn, helps achieve a compact form factor that still delivers the industry's highest *1 pixel count of approximately 5.32 effective megapixels on the IMX992, and approximately 3.21 effective megapixels on the IMX993. The higher pixel count enables detection of tiny objects or imaging across a wide range, contributing to significantly improved recognition and measurement precision in various inspections using short-wavelength infrared light.
  • Low-noise imaging even in dark locations possible by switching the shooting mode
    Inclusion of new shooting modes enables low-noise imaging without being affected by environmental brightness. In dark environments with limited light, High Conversion Gain (HCG) mode directly amplifies the signal with minimal noise after being converted to an electrical signal from light, thereby relatively reducing the amount of noise downstream. Doing so minimizes the impact of noise in dark locations, leading to greater recognition precision. On the other hand, in bright environments with plenty of light, Low Conversion Gain (LCG) mode enables imaging prioritizing the dynamic range.

    Furthermore, enabling Dual Read Rolling Shutter (DRRS) *2 outputs images from the sensor in two distinct types. These images are then composited on the camera to acquire an image with significantly reduced noise.

*2

To use DRRS, the downstream system must have frame memory to perform image calculation.

  • Optimized pixel structure for high-sensitivity imaging across a wide range
    SSS's SWIR image sensors employ a thinner indium-phosphorous (InP) layer on top, which would otherwise inevitably absorb visible light, thereby allowing visible light to reach the indium-gallium arsenide (InGaAs) layer underneath, delivering high quantum efficiency even in the visible wavelength. The new products deliver even higher quantum efficiency by optimizing the pixel structure, enabling more uniform sensitivity characteristics across a wide wavelength band from 0.4 to 1.7 μm. Minimizing the image quality differences between wavelengths makes it possible to use the image sensor in a variety of industrial applications and contributes to improved reliability in inspection, recognition, and measurement applications.

Related Links
Information on SenSWIR™, SSS's short-wavelength infrared image sensor technology:
https://www.sony-semicon.com/en/technology/industry/senswir.html

IMX992 and IMX993 product website:
https://www.sony-semicon.com/en/products/is/industry/swir/imx992-993.html

Key Specifications

Model name

IMX992

IMX993

Effective pixels

2592 × 2056 (H × V)

Approx. 5.32 megapixels

2080 × 1544 (H × V)

Approx. 3.21 megapixels

Image size

Diagonal 11.4 mm (1/1.4 type)

Diagonal 8.9 mm (1/1.8 type)

Unit cell size

3.45 μm × 3.45 μm (H × V)

3.45 μm × 3.45 μm (H × V)

Frame rate

All pixels

8 bit: 130 fps

10 bit: 120 fps

12 bit: 70 fps

8 bit: 170 fps

10 bit: 150 fps

12 bit: 90 fps

Power supply

1.2 V, 1.8 V, 2.2 V, 3.3 V

2.2 V (pixels)

1.2 V, 1.8 V, 2.2V, 3.3 V

2.2 V (pixels)

Main features

Global shutter, *3 digital
thermometer, ROI

Global shutter, *3 digital
thermometer, ROI

Output

SLVS (2 ch/4 ch/8 ch)

MIPI (2 lane/4 lane)

SLVS (2 ch/4 ch/8 ch)

MIPI (2 lane/4 lane)

Package size

Ceramic PGA with built-in
thermoelectric cooling device:

30.0 mm × 30.0 mm (H × V)

Ceramic LGA:

21.0 mm × 20.0 mm (H × V)

Ceramic PGA with built-in
thermoelectric cooling device:

30.0 mm × 30.0 mm (H × V)

Ceramic LGA:

21.0 mm × 20.0 mm (H × V)

*3

Rolling shutter when DRRS is enabled.



Note:

SenSWIR and the SenSWIR logo are the registered trademarks or trademarks of the Sony Group Corporation or its affiliated companies.

Cision View original content to download multimedia: https://www.prnewswire.com/news-releases/sony-semiconductor-solutions-to-release-swir-image-sensor-for-industrial-applications-with-industry-leading-5-32-effective-megapixels-301999702.html

SOURCE Sony Semiconductor Solutions Corporation

You May Also Like

Get the InvestorsObserver App

InvestorsObserver App
iOS App Android App